Friday, November 18, 2016

VOACAP Greyline User Manual

VOACAP Greyline is an online service that provides a number of sun-related data for any given location such as sunrise/sunset times, dawn, dusk, solar midnight, and, for circuits, the solar midnight time for the circuit's half-way point. The idea is to offer data which would help DXers/contesters leverage any "grayline" related low-band openings.

The URL: http://www.voacap.com/greyline/index.html

What's in it for you?


The greyline service offers three types of solar calculations:

  1. Daily sunrise and sunset times for a wide selection of DXCC locations
  2. All-year sun calendar: sunrise and sunset times for a user-defined location for every day of the year selected
  3. A deep analysis of DXCC countries that are located along the grayline terminator or in darkness at sunrise and sunset in a user-defined location

1. Daily sunrise and sunset times for a wide selection of DXCC locations


This is the default calculation when you go to the site at http://www.voacap.com/greyline/index.html. The DXCC locations are the pre-defined locations used in VOACAP Online. In reality, VOACAP Greyline offers much more than simple sunrise or sunset times. Let's look into the times calculated; all times in all calculations are UTC.



CLICK TO ENLARGE


There are actually seven different times which will be calculated: three related to sunrise, three related to sunset, and one related to solar midnight.

Sunrise-related times:


DAWN = a point in time when the sun is 6 degrees below the horizon before sunrise
RISE = the sunrise time at the horizon
POST = a point in time when the sun is 3 degrees above the horizon after sunrise

Sunset-related times:


PRE  = a point in time when the sun is degrees above the horizon before sunset
SET  = the sunset time at the horizon
DUSK = a point in time when the sun is 6 degrees below the horizon after sunset

Solar midnight


MNITE = This is the time opposite to solar noon when the sun is closest to the nadir (the direction pointing directly below a particular location), and the night is equidistant from dusk and dawn. The solar midnight rarely coincides with midnight on a clock. Solar midnight is dependent on longitude and time of the year rather than on a time zone. [Wikipedia: https://en.wikipedia.org/wiki/Midnight]


POST and PRE times


The POST and PRE times are based on an educated choice; there is no conscious theory behind "the 3 degrees above the horizon". We know from experience that the low-band propagation starts to deteriorate at some point after sunrise, and that the propagation starts to get enhanced before the actual sunset, and "3 degrees" was my personal choice for this purpose. So, in effect, I am using the time periods from DAWN to POST, and from PRE to DUSK as my internal limits in my calculations when filtering the results in the deep analysis (the calculation type 3).

The default date for daily calculations in the currect UTC day. If you wish to calculate times for all DXCC sites for a specific date, just select the date from the calendar, and press "Go".

To make this calculation again for the current date after setting the date (or after setting a location), just press first "Reset" and then "Go".

There can be cases where no time is calculated but "--:--" is shown instead. This means that the sun does not reach the degree position set for the calculation.

For example, let's take some Finland locations at midsummer (June 21):

CITY                          DAWN   RISE   POST   |  PRE    SET    DUSK   |  MNITE
OH6 Seinajoki                 --:--  00:25  01:26  |  19:34  20:35  --:--  |  22:30
OH6 Vaasa                     --:--  00:23  01:28  |  19:43  20:47  --:--  |  22:35
OH7 Joensuu                   --:--  00:00  01:01  |  19:04  20:05  --:--  |  22:02
OH7 Kuopio                    --:--  00:03  01:06  |  19:15  20:18  --:--  |  22:11
OH8 Kajaani                   --:--  23:34  00:50  |  19:31  20:47  --:--  |  22:10
OH8 Oulu                      --:--  23:19  00:49  |  19:50  21:20  --:--  |  22:19

As the times for DAWN and DUSK are labelled as "--:--", it means that the sun does not reach 6 degrees before sunrise nor does it go below 6 degrees after sunset. On the other hand, for instance, if all columns are labelled as "--:--", it can mean that it's either midnight sun (polar day) or polar night.

2. All-year sun calendar: sunrise and sunset times for a user-defined location for every day of the year selected


If you wish to run the solar data above for every day of the chosen year for your own location, just enter your Maidenhead grid locator in the "Locator" field, choose any date (click on a date) in the year you are interested in, and checkmark the "Calendar" option. Then press "Go".

The locator needs to be given in six characters. If you do not know your locator, please click on the "Locator" link to go to http://www.voacap.com/qth.html which shows you the coordinates and the corresponding grod locator with the precision required (6 characters).

Suppose we want a all-year sun calendar for Valletta (9H) for the year 2017. Then I would first check the grid locator (JM75gv) and select any date from the calendar in 2017. Then I would checkmark the "Calendar" box, and press "Go".

The result will be as follows:


CLICK TO ENLARGE


3. A deep analysis of DXCC countries that are located along the grayline terminator or in darkness at sunrise and sunset in a user-defined location


This calculation type is the most elaborate. First of all, it requires that you set a location (as a 6-character Maidenhead grid locator), and set a date you are interested in. Do not checkmark the "Calendar" box! Then press "Go".

Two calculations will be done for all circuits from the location you set to the pre-defined locations in VOACAP Greyline's DXCC country list: sunrise and sunset calculations.

New columns


There will be a number of new columns on the result page as we are now dealing with point-to-point circuits. The columns are:


  • HALFW = This is the solar midnight at the half-way point along the circuit in question. This is the time ON4UN says can be one of the peak times along that circuit.
  • KM/SP and DEG = This is the distance from the Location to the DXCC location in kilometers via short-path (SP). DEG is the corresponding bearing from Locator to the DXCC location.
  • KM/LP and DEG = This is the distance from the Location to the DXCC location in kilometers via long-path (SP). DEG is the corresponding bearing from Locator to the DXCC location. If you want the distance in miles, divide kilometers by 1.609 ...


As said, the service calculates the sunrise and sunset times for the given Locator. Then it tries first to find the locations in DXCC countries that are along the grayline terminator. In those locations, the sun can either be rising or setting. The time frame for the terminator is determined by DAWN-POST and PRE-DUSK times. If the sun is rising, you will only see the sunrise-related times for that particular DXCC location, and consequently, if the sun is setting in that particular DXCC location, you will only see the sunset-related times.

Secondly, the service finds all locations in the DXCC country list where the location is in darkness. So, this is the situation when the sun rises or sets in the Location but it's still dark in the DXCC location. Think about the morning propagation of signals from the west when the sun start to rise in your location.

An example


Let me illustrate what's happening. In the image below, this is an excerpt of the result page for my locator KP03sd on November 15, 2016.


CLICK TO ENLARGE


In Bullet 1, we can see that at my sunrise, the sun is rising also in 1A SMOM and in 3A Monaco. Bullet 2 reveals, on the other hand, that - at the same time - the sun is setting in 3D2/C Conway Reef and 3D2/R Rotuma. Note that in these two cases, only the sunrise or sunset times are shown, so that the user can more easily distinguish whether there is a sunset or sunrise in the DXCC location.

And finally, Bullet 3 shows that there are locations which are in darkness at my sunrise. When a DXCC location is in darkness, both the sunrise and sunset times are given for the location. The darkness period is calculated to be the time period from PRE to POST in that particular DXCC location. This actually means that the darkness period also includes the twilight period.

For instance, 8P Barbados is in "darkness" from 21:11 UTC (PRE) to 10:14 UTC (POST). And we can see that the twilight period for KP03sd is from 05:58 UTC (DAWN) to 07:47 UTC (POST). So, 8P is filtered to be part of the results as it's in darkness when the sun is rising in the given Location.

A similar kind of analysis is made for the sunset at Locator, too.

Saturday, November 12, 2016

VOACAP Online now offers multiple coverage maps at one go

The VOACAP Online Coverage Maps Service at http://www.voacap.com/area/ is now able to plot multiple coverage maps at one go. This was made possible by a major code re-factoring at www.voacap.com. Earlier, only one map could be plotted at a time.

In a nutshell, while entering the input values, at "Time UTC:", choose the start time for your maps. The default is the currect UTC hour. See image below.


Then there is a pop-up menu for "Period". There you will need to choose the time period for your maps, defaulting to 1, i.e. the map for the current hour. You can choose a time period up to 12 hours, so to cover a 24-hour period, you will only need to make two runs. Unfortunately, running and plotting 24 hours, or 24 coverage maps, at one go takes a considerable amount of time, resulting in a server connection time-out, hence 12 hours is the limit.

So when viewing the result page with the maps, you can then conveniently print that page to PDF. You may need to install some extra tools such as CutePDF Writer if this functionality is not offered to you by your operating system as standard.

Please be also advised that all the coverage maps created in the service will be deleted in a more frequent cycle than before so please do not link directly to the maps produced.

Also, earlier this month, I added the option of choosing the noise level at RX sites. This option was also added to VOACAP Online Point-to-Point Service.

Give it a spin and let me know what you think!